This Paper Cannot Be Used; Cannot Print As Selected. Another Roll Is In Use; Roll Printing Is Selected; Roll Printing Is Selected, But Sheets Are Loaded - Canon imagePROGRAF iPF825 MFP M40 User Manual

Error Message >

This paper cannot be used.

Paper that is too large for the printer has been
loaded.
Paper that is too small for the printer has been
loaded.
Paper has been loaded that is too small to print
the test pattern for printhead adjustment or noz-
zle checking.

Cannot print as selected. Another roll is in use.

A printed document remains in the Out-
put Tray without being cut and a print job
was received that specifies the other roll.

Roll printing is selected.

You have attempted to print a test print sheet or other printer
status information on a roll, but no roll is loaded.
13

Roll printing is selected, but sheets are loaded.

A print job for rolls was received when a sheet is
loaded.
892
This paper cannot be used.
Messages regarding paper >
Cause
Cause
Cause
Cause
Lift the Release Lever and load paper of the correct size.
(See "Paper Sizes.")
Lift the Release Lever and load paper of the correct size.
(See "Paper Sizes.")
Lift the Release Lever and load unused paper A4 or larger. More
than one sheet may be required depending on the adjustment.
Corrective Action
Follow these steps to load the other roll after cutting the printed document.
1. Hold down the Stop button for a second or more to cancel printing.
2. Cut the printed document.
(See "Specifying the Cutting Method for Rolls.")
3. Load the other roll and resend the print job.
(See "Loading and Printing on Rolls.")
Load a roll and try printing again.
To print on a sheet instead, hold down the Stop button
for more than a second to cancel printing, load a sheet,
and then print.
(See "Loading and Printing on Sheets.")
Follow these steps to load and print on a roll.
1. Press the OK button and remove the sheet.
(See "Removing Sheets.")
2. Load a new roll.
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Hold down the Stop button for a second or more to cancel printing.
Corrective Action
→P.626
→P.626
→P.654
→P.3
Corrective Action
Corrective Action
→P.669
→P.634
→P.8
iPF825