Roll Paper Cannot Be Inserted Into The Paper Feed Slot - Canon imagePROGRAF iPF825 MFP M40 User Manual

Troubleshooting
7.
Lower the Release Lever and close the Top Cover.
8.
In a crouching position, push the Roll Unit in.
12
9.
Position the Wheeled Output Stacker by the printer. (See "Using the Wheeled Output Stacker.")
10.
Turn the printer on. (See "Turning the Printer On and Off.")
856

Roll Paper Cannot be Inserted into the Paper Feed Slot

The roll paper is warped.
If paper cannot be advanced from Roll 2 (Lower),
the Roll Unit Cable is disconnected.
Roll Paper Cannot be Inserted into the Paper Feed Slot
> Problems Regarding Paper
Cause
>
→P.702
Straighten out curls and reload the roll.
Connect the Roll Unit Cable firmly to the Roll Unit Power Sup-
ply Inlet and the inlet on the roll unit.
→P.671
Corrective Action
iPF825