Switching Modes - Canon imagePROGRAF iPF825 MFP M40 User Manual
Large format printer
Hide thumbs
Also See for imagePROGRAF iPF825 MFP M40:
- User manual (888 pages) ,
- Basic manual (53 pages) ,
- Setup manual (16 pages)
Table of Contents
Advertisement
Printer Parts
>
Control Panel
Switching Modes
Switching the Printer Online/Offline
Press the Online button to switch the printer online or offline.
The Online lamp is lit in Online mode. Printing is possible in this mode.
The Online lamp is off in Offline mode.
9
Depending on the status, the printer switches online and offline as follows.
Printer Status
Online
Online, printing
710
Offline
Offline, when an error
message is displayed
Switching Modes
>
The printer switches offline and the Online lamp goes off.
Switches offline and printing is paused.
When printing is paused, the Printing menu is available.
If paper has been advanced, the printer goes online and the Online lamp is lit.
In the case of error messages other than those shown below or if paper is not loaded, the
printer remains offline until you solve the problem. The Online lamp remains off.
If the following error messages are displayed, the printer goes online and printing is re-
sumed.
• "Insufficient paper for job"
• "PHead needs cleaning."
When Online is Pressed
iPF825
Advertisement
Table of Contents
Troubleshooting
