Borderless Printing By Resizing Originals To Fit The Roll Width (Mac Os X) - Canon imagePROGRAF iPF825 MFP M40 User Manual

Enhanced Printing Options
10.
Select the
3
11.
Select the width of the loaded roll in the Roll Paper Width list—in this case, click 10-in. Roll (254.0mm).
12.
Click OK to close the Information dialog box.
13.
C
In Borderless Printing Method, make sure
14.
Confirm the print settings and print as desired.
Important
• When Automatically switch paper sources (paper size priority) is enabled on the Device Settings sheet,
only Scale to fit Roll Paper Width can be selected in Borderless Printing Method. In this case, printing is
always performed from roll 1 (the upper roll). If a paper size or media type that does not support borderless
printing is loaded in roll 1, you cannot perform borderless printing.
112

Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)

This topic describes how to enlarge originals before borderless printing to match the roll width, based on the following ex-
ample.
• Document: Any Type
• Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
• Paper: Roll paper
• Paper type: Heavyweight Coated Paper
Borderless Printing by Resizing Originals to Fit the Roll Width (Mac OS X)
> Borderless Printing
B
Borderless Printing check box to display the Information dialog box.
Note
• For tips on confirming print settings, see " Confirming Print Settings (Windows)
>
E
Scale to fit Roll Paper Width is selected.
"
→P.211
iPF825