Hp-Gl/2 Problems; Lines Or Images Are Missing In The Hp-Gl/2 Data That Was Printed; Lines Are Printed Too Thick Or Thin During Hp-Gl/2 Printing; Hp-Gl/2 Jobs Are Printed In Monochrome (Or Color) - Canon imagePROGRAF iPF825 MFP M40 User Manual

HP-GL/2 problems

Lines or images are missing in the HP-GL/2 data that was printed. ............................................................... 877

Lines Are Printed Too Thick or Thin During HP-GL/2 Printing ........................................................................ 877

HP-GL/2 jobs are printed in monochrome (or color). ...................................................................................... 877

Printed Colors in Line Drawings are Inaccurate During HP-GL/2 Printing ...................................................... 877

HP-GL/2 jobs are printed 6 mm larger than specified ..................................................................................... 878
HP-GL/2 jobs are printed at maximum size, even if a standard size is specified ............................................ 878
HP-GL/2 printing takes a long time. ................................................................................................................ 878
The printer stops when printing a HP-GL/2 job (the carriage stops moving) ................................................... 878
Lines or images are missing in the HP-GL/2 data that was printed.
The memory is full.
An HP-GL/2 command not supported by this printer was re-
ceived.
The printer has received print data that includes HP RTL
commands when Auto Rotate is On.
Lines Are Printed Too Thick or Thin During HP-GL/2 Printing
Cause
The Line Width setting in
the main menu is incorrect.
HP-GL/2 jobs are printed in monochrome (or color).
Cause
The Color Mode is
incorrect.
Printed Colors in Line Drawings are Inaccurate During HP-GL/2 Printing
Cause
AdjustFaintLines in the main menu
is set to On.
iPF825
Cause
Confirm the selection in Line Width. If fine lines are printed faint, setting ThickenFi-
neLines to On in the main menu will print the lines more distinctly.
(See "Main Menu Settings.")
On the printer Control Panel, check the Color Mode setting.
(See "Main Menu Settings.")
However, for optimal Printhead performance, the printer consumes trace amounts of color ink
even when Monochrome is selected as Color Mode.
Selecting Off may help produce the expected results. However, lines in some
colors may appear broken.
Troubleshooting
Corrective Action
Check the size of the data in the print job.
Check the print job and settings.
Set Auto Rotate to Off before attempting to print again.
(See "Main Menu Settings.")
Corrective Action
→P.730
Corrective Action
→P.730
Corrective Action
Lines or images are missing in the HP-GL/2 data that was printed.
> HP-GL/2 problems >
→P.730
12
877