Canon imagePROGRAF iPF825 MFP M40 User Manual page 857

At this point, ink is drawn out from inside the tubes.
Important
• Do not remove the Maintenance Cartridge during this process.
When the process is finished, "Finished preparing to move printer. Turn off printer." is displayed.
14.
Press the Power button and turn off the printer.
Important
• Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off
and transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the Ink
Tank, wait until the printer comes online, and follow this procedure again.
15.
Disconnect the printer power cord and interface cable, as well as the Roll Unit power cord.
16.
Open the Top Cover, grasp the Belt, insert it between the Belt Stopper, and affix the Belt Stopper with a hex screw
at the position indicated.
iPF825
Maintenance > Other Maintenance
Preparing to Transfer the Printer
>
11
841