Resizing Originals By Entering A Scaling Value (Mac Os) - Canon imageprograf IPF785 User Manual

iPF785
9
A
In the Page Size list, click the size of the original as specified in the application. In this case, click ISO
A4.
10
C
Select the Enlarged/Reduced Printing check box.
11
Click ISO A4 in the
12
F
Click Scaling and enter 120.
• You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and
right edges of the paper will not be printed.
Note
If the original size after enlargement or reduction is
•
smaller than the paper size, the original is printed in
the upper-left corner. In this case, you can center
originals by selecting
out sheet.
13
Confirm the print settings and print as desired.
• For tips on confirming print settings, see "Confirming Print Settings ."
Note

Resizing Originals by Entering a Scaling Value (Mac OS)

Resizing Originals by Entering a Scaling Value (Mac OS)

This topic describes how to enlarge originals before printing by entering a scaling value, based on the following
example.
Document: Any Type
•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
•
Paper: Roll paper
•
Paper type: Plain Paper
•
Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
•
User's Guide
G
Paper Size list.
E
Print Centered on the Lay-
Resizing Originals by Entering a Scaling Value (Mac OS)
P.145
➔
67