Canon imagePROGRAF iPF825 MFP M40 User Manual page 703

Note
• If additional fine-tuning is necessary after Manual Band Adj, use Fine Band Adj.. (See "Banding Adjust-
ment During Printing (Fine Band Adj.).")
• Use paper of the same type and size for adjustment as you will use for printing.
Paper to Prepare
Rolls An unused roll at least 10 inches wide
Sheets Two sheets of unused paper of at least A4/Letter size
Execute Manual Band Adj as follows.
1.
Load paper.
• Attaching the Roll Holder to Rolls
• Loading Rolls in the Printer
• Loading Sheets in the Printer
Note
• Always make sure the loaded paper matches the type of paper specified. Adjustment cannot be com-
pleted correctly unless the setting value matches the loaded paper.
2.
Press the Menu button to display MAIN MENU.
3.
Press ▲ or ▼ to select Adjust Printer, and then press the ▶ button.
4.
Press ▲ or ▼ to select Manual Band Adj, and then press the ▶ button.
5.
Press ▲ or ▼ to select Yes, and then press the OK button.
Test pattern A is printed for band adjustment.
6.
Examine test pattern A for band adjustment. Determine the pattern in which streaks are least noticeable.
iPF825
Adjustments for Better Print Quality
→P.688
→P.629
→P.634
→P.664
> Adjusting the feed amount
Manual Band Adjustment (Manual Band Adj)
>
8
687