Canon imagePROGRAF iPF825 MFP M40 User Manual page 757

Setting Item
Roll Switching
TrimEdge Reload
Noz. Check Freq.
CarriageScanWdth
Sleep Timer
Length Unit
Time Zone
Date Format
Date & Time
Language
Contrast Adj.
Reset PaprSetngs
Erase HDD Data
Output Method
iPF825
No RollSwitching
Date
Time
High Speed
Secure High Spd.
Secure
Print
Print (Auto Del)
Description, Instructions
Prints using the roll currently advanced on the Platen.
Specify whether to trim the leading edge of the currently
retracted roll when the roll is advanced. Cut the edge if
you are concerned about any marks left on the roll when
the roll is left in the retracted position. Selecting On will
always trim the edge when the roll is advanced from the
retracted position. Selecting Automatic will trim the edge
when the roll has been in the retracted position for two
days or more.
Specify the timing for automatic checks of nozzle clog-
ging. Choose 1 page to check once per printed page.
Choose 10 pages to check once per ten printed pages.
Choose Automatic to have the printer automatically ad-
just the timing for checks based on the frequency of noz-
zle use.
For specifying the carriage scan width during printing. Se-
lect Automatic for movement equivalent to the width of
paper loaded. Selecting Fixed will reduce any soiling on
the back of the paper, although printing may take a little
longer.
Specify the period before the printer enters sleep mode.
Choose the unit of measurement when roll length is dis-
played. You can switch the unit for the value in Roll
Length Set and the amount of paper left as indicated in
the submenu.
Specify the time zone. Time zone options indicate a main
city in this time zone and the difference from Greenwich
Mean Time.
Specify the date format.
Set the current date.
Set the current time. Available only if the Date setting is
specified.
Specify the language used on the Display Screen.
Adjust the Display Screen contrast level.
Restores settings that you have changed with Media Con-
figuration Tool to the default values.
Erases file management data for print job data stored on
the printer's hard disk. (See "Erasing Data on the Print-
er's Hard Disk.")
→P.758
Overwrites the entire hard disk with random data. (See
"Erasing Data on the Printer's Hard Disk.")
Overwrites the entire hard disk with 00, FF, and random
data (one time each). Verification is performed to check if
the data was correctly written. (See "Erasing Data on the
Printer's Hard Disk.")
→P.758
Select the output method.
Printer Parts > Control Panel
→P.758
Main Menu Settings
>
9
741