Canon imagePROGRAF iPF825 MFP M40 User Manual page 802

Network Setting
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the NetWare group to display the Edit NetWare Protocol Settings page.
6.
Make sure the Frame Type indicates the frame type used on the NetWare network.
7.
To use burst mode, choose On for NCP Burst Mode.
8.
In Print Application, click the print service to be used.
9.
10
For packet signature, click If Requested by Server in Packet Signature.
10.
Complete the following settings based on the selected service.
• If you have selected Bindery PServer: Queue Server Mode (Using a Bindery Print Server)
1.
2.
3.
4.
786
• If you have selected RPrinter: Remote Printer Mode (Using a Bindery Print Server)
1.
2.
• If you have selected NDS PServer: Queue Server Mode (Using an NDS Print Server)
1.
Specifying NetWare Protocols
> Network Setting (Windows)
Note
• Burst mode supports fast data transfer when printing in queue server mode. Normally, choose On.
Note
• Only one print service selected here will be enabled. Multiple print services are not available at the
same time.
In File Server Name, enter the file server name.
In Print Server Name, enter the name of the print server created in " Specifying NetWare Print Serv-
ices ."
→P.783
In Print Server Password, enter the password of the print server created in " Specifying NetWare Print
Services ."
→P.783
In Polling Interval, specify the interval at which the printer checks the NetWare print queue.
In Print Server Name, enter the advertising name of the print server created in " Specifying NetWare
Print Services ."
→P.783
In Printer Number, enter the same printer number specified in " Specifying NetWare Print Serv-
."
ices
→P.783
In Tree Name and Context Name, enter the tree and context name of the print server.
>
iPF825