Cleaning The Exposure Glass - Ricoh SP 3510SF User Manual

Hide thumbs Also See for SP 3510SF:

Table of Contents

10. Maintenance

Reload the removed paper into the tray, and then push the tray carefully into the machine

until it clicks into place.

Insert the plug of the power cord into the wall socket securely. Connect all the interface

cables that were removed.

Turn on the power.

• If jams or multi-sheet feeds occur after cleaning the friction pad, contact your sales or service

representative.

• If the optional tray 2 is installed, clean its friction pad and paper feed roller in the same way as you

did for tray 1.

Cleaning the Exposure Glass

The following procedure describes how to clean the exposure glass.

Lift the ARDF or ADF.

Be careful not to hold the input tray when lifting the ARDF or ADF, for the tray might be damaged.

Clean the parts indicated with arrows with a soft damp cloth and then wipe the same

parts with a dry cloth to remove any remaining moisture.

Show Quick Links

Table of Contents