Configuring The Ethernet Speed - Ricoh SP 3510SF User Manual

Hide thumbs Also See for SP 3510SF:

Table of Contents

• When [DHCP] is activated, manually configured IPv6 address settings are not used.

• For details about turning the machine on and off, see p.55 "Turning the Power on".

• For details about printing configuration page, see p.291 "Printing the Configuration Page".

• For details about [Admin. Tools Lock], see p.298 "Administrator Settings".

Configuring the Ethernet Speed

You can set the speed that the machine will use for Ethernet communications.

In most cases, this should be left on the default setting, [Auto Select]. This setting allows two interfaces to

automatically determine the optimum speed when they are connected.

• Connection cannot be established if the selected Ethernet speed does not match your network's

transmission speed.

• The use of this feature is recommended. To use it, select [Auto Select].

[10Mbps Half

10 Mbps half

10 Mbps full

100 Mbps full

[10Mbps Full

Half Duplex]

Full Duplex]

Configuring the Machine

[Auto Select]

Show Quick Links

Table of Contents