Maintaining Your Machine; How To Clean The Machine; Cleaning The Exposure Glass And Scanning Glass - Ricoh Pro C7200S Operator's Manual

12. Maintenance

Maintaining Your Machine

How to Clean the Machine

• When performing maintenance on the machine, always disconnect the power cord from the
wall outlet.
• If the machine's interior is not cleaned regularly, dust will accumulate. Fire and breakdown can
result from heavy accumulation of dust inside this machine. Contact your sales or service
representative for details about and charges for cleaning the machine's interior.
• Do not use chemical cleaners or organic solvents, such as thinner or benzene. If such substances
get inside the machine or melt plastic parts, a failure might occur.
• Do not clean parts other than those explicitly specified in this manual. Other parts should only be
cleaned by your service representative.
Wipe the machine with a soft, dry cloth. If this does not remove the dirt, wipe the machine with a damp
and tightly wrung cloth. If a damp cloth still does not remove the dirt, try using a mild detergent. Use the
cleaning cloth provided with the machine to wipe the exposure glass or scanning glass.
If a cleaning procedure is specified for the part, use the specified procedure for cleaning.

Cleaning the Exposure Glass and Scanning Glass

If the exposure glass or scanning glass is dirty, copy clarity may be reduced. Clean these parts if they
are dirty.
• Do not close the ADF while hard objects are placed on the scanning glass. Doing so may damage
the machine.
Cleaning the Machine
Use the cleaning cloth provided with the machine to wipe the parts.
534