Configuring The Ipsec Settings; Configuring The Ipsec Global Settings - Ricoh SP 3510SF User Manual

Configuring the IPsec Settings

Click [IPsec Settings] to display the page for configuring the IPsec settings.
This page contains the following tabs: [IPsec Global Settings] and [IPsec Policy List].
• This function is available only when an administrator password is specified.

Configuring the IPsec Global Settings

Click the [IPsec Global Settings] tab on the IPsec settings page to configure the IPsec global settings.
Item
IPsec Function
Default Policy
Broadcast and
Multicast Bypass
All ICMP Bypass
Select whether to enable or disable IPsec.
Select whether to allow for the default IPsec policy.
Select the services that you do not want to apply IPsec from the following:
[DHCPv4], [DHCPv6], [SNMP], [mDNS], [NetBIOS], [UDP Port 53550]
Select whether to apply IPsec to ICMP packets (IPv4 and IPv6) from the
following:
[Active]: All ICMP packets will be bypassed without IPsec protection.
"ping" command (echo request and echo reply) is not encapsulated by
IPsec.
[Inactive]: Some ICMP message types will be bypassed without IPsec
protection.
Configuring the IPsec Settings
Description
345