Ricoh SP 3510SF User Manual page 324

8. Configuring the Machine Using Web Image Monitor
Item
Print Automatically
Print Forwarded File
Notify Forward Status
Forwarding Destination
Number of Trials of
Forwarding (time)
Interval of Forwarding
Trial (min.)
Authorized Reception
Item
Authorized Reception
322
Select whether the faxes received into the machine's memory are printed
automatically or stored for later manual printing.
Select whether the forwarded faxes are printed or not.
Select whether e-mail notifications are sent after forwarding faxes or not. E-
mail notification destination depends on how [Forwarding Destination] is
specified:
• If specified with [E-mail Address]: the notification will be sent to the
administrator e-mail address specified in [Administrator E-mail
Address] in the [Administrator] page.
• If specified with [Scan Destination]: the notification will be sent to the
notification destination specified for the selected scan destination.
Note that if a destination e-mail address is not specified, no notification will
be sent even if this setting is enabled.
Specifies the forwarding destination.
• [E-mail Address]: Enter a destination e-mail address. Can contain up
to 64 characters.
• [Scan Destination]: Select a scan destination as a forwarding
destination.
Specifies how many times the machine attempts to forward a fax (1 to 255
times).
Specifies how many minutes the machine waits between forwarding
attempts (1 to 255 minutes).
Enable this setting to set the machine to receive (or reject) faxes only from
the programmed Special Senders. This helps you screen out unwanted
documents, such as junk faxes, and prevents the wasting of fax paper.
Special Senders can be programmed in the [Special Sender] page.
Description
Description