Ricoh SP 3510SF User Manual page 445
Hide thumbs
Also See for SP 3510SF:
- Quick manual (51 pages) ,
- Brochure & specs (4 pages) ,
- User manual (476 pages)
Table of Contents
Advertisement
22.
Under "Search Options", enter an attribute type by which the user can be distinguished in
[Attribute (Optional)].
The attribute value may change depending on the server environment.
23.
Enter the name shown on the machine's control panel, which is used for LDAP search to
search a user based on the attribute type specified in [Attribute (Optional)], in [Key
Display (Optional)].
24.
Enter the administrator password if required.
25.
Click [Apply].
26.
Close the Web browser.
Changing the LDAP server
This section describes how to change the programmed LDAP server.
1.
Start the Web browser, and access the machine by entering its IP address.
2.
Click [LDAP Settings].
3.
Click [Program/Change/Delete LDAP Server].
4.
Under "Program/Change/Delete", select the LDAP server you want to change, and then
click [Change].
"Edit LDAP Server" page appears.
5.
Change the settings as necessary.
6.
Enter the administrator password if required.
7.
Click [Apply].
8.
Close the Web browser.
Deleting the LDAP server
This section describes how to delete the programmed LDAP server.
1.
Start the Web browser, and access the machine by entering its IP address.
2.
Click [LDAP Settings].
3.
Click [Program/Change/Delete LDAP Server].
4.
Under "Program/Change/Delete", select the LDAP server you want to delete, and then
click [Delete].
Current configuration of the selected LDAP server appears.
5.
Enter the administrator password if required.
6.
Click [Apply].
Using the LDAP Authentication and Address Search Functions
443
Hide quick links:
Advertisement
Table of Contents
