Ricoh SP 3510SF User Manual page 240

6. Using the Fax Function
2. Select the LAN-Fax driver as the printer, and then click a button such as [Preferences] or
[Properties] to open the driver's properties.
LAN-Fax driver properties dialog box appears.
3. Click the [Setup] tab.
4. Configure settings as necessary, and then click [OK].
• For details about settings, see p.238 "Settings you can configure in the LAN-Fax driver's
properties".
Settings you can configure in the LAN-Fax driver's properties
This section describes the settings you can configure in the LAN-Fax driver's properties.
1
2
3
4
5
1. Paper Size
Specifies the paper size.
• Document Size
Specifies the paper size of the document you are sending. If a paper size is specified in the application,
that paper size will be used. Otherwise, the paper size specified here will be used.
• Sending Size:
Displays the actual paper size of the fax that is sent. The actual size of the fax will be A4, if the size of
the document being faxed is A3, B4, or smaller than A4. A3/B4 documents will be reduced to sending
size automatically.
238
6 7
CMF129