Ricoh SP 3510SF User Manual page 409

Message
Scanning could not be
Set Original to ADF
performed because the originals
Cannot use exposure
were not placed in the ARDF or
glass
ADF, even though the machine
with set. in [Scan
is set to scan originals larger
Size].
than A4/Letter size.
The machine's memory reached
Sort Copy was capacity while originals were
Cancelled being scanned from the ARDF
or ADF to perform sort copying.
A transmission error occurred,
TX Comm. Error and the fax could not be
transmitted correctly.
2-sided copy could not be
performed because the tray
does not contain the valid type
Unavailable Paper
paper, which are thin, plain,
Type
recycled, color, preprinted,
prepunched, thick paper 1, or
letterhead.
The Scan to USB function failed
because a USB device other
Unsupported Device
than a USB flash disk or a USB
Please Remove
flash disk with an unsupported
file system was used.
The Scan to USB function failed
because a USB device other
Unsupported Device
than a USB flash disk or a USB
Press Clear key
flash disk with an unsupported
file system was used.
Causes
• Use the ARDF or ADF, even when
• If you need to use the exposure glass,
Press [Exit] to print the originals that were
successfully scanned into memory. Then,
copy again the originals left in the ARDF or
ADF.
If the [Auto Redial] setting is enabled, the
machine will redial the number and try
again. If all attempts fail, or if the machine
is in Immediate Transmission mode, the fax
will not be transmitted. Try the operation
again.
• Specify the tray containing the valid
• Specify the valid paper type for the
Use a USB flash disk that is compatible
with the Scan to USB function.
Use a USB flash disk that is compatible
with the Scan to USB function.
Error and Status Messages on the Screen
Solutions
scanning A4/Letter or smaller size
originals.
set A4/Letter or smaller size in [Scan
Size] under scanner settings, and then
try again. See p.263 "Scanner
Settings".
type paper in the [Select Paper]
setting. See p.257 "Copy Settings".
tray selected for printing copies. See
p.279 "System Settings".
407