Ricoh SP 3510SF User Manual page 345

Item
Authentication
Login Name Attribute
User Name (Optional)
Password (Optional)
Japanese Character
Code Set (Required)
Connection Test
Search Conditions
Item
Identification Name
(Required)
Email Address
(Required)
Fax Number (Required) Enter an attribute type by which the user fax number can be distinguished.
Select whether or not to perform authentication when the machine connects
to the LDAP server.
• [Inactive]: Anonymous (no authentication)
• [Active]: Cleartext authentication
• [High Security]: CRAM-MD5 authentication
If [Active] or [High Security] is selected, you must also set [Login Name
Attribute], [User Name (Optional)], and [Password (Optional)].
Specify the user name prefix or login name attribute of Bind DN, such as
"uid" or "cn", according to the LDAP server. Can contain up to 16
characters.
If [Authentication] is [Active] or [High Security], you cannot leave this setting
blank.
Enter the user name to log in to the LDAP server. Can contain up to 128
characters.
If [Authentication] is [Active] or [High Security], you cannot leave this setting
blank.
Enter the password to log in to the LDAP server. Can contain up to 128
characters.
If [Authentication] is [Active] or [High Security], you cannot leave this setting
blank.
Select the character code the LDAP server uses.
Click [Start] to see whether or not connection to the LDAP server is possible
using the settings made.
Enter an attribute type by which the user name can be distinguished. Can
contain up to 16 characters.
Enter an attribute type by which the user e-mail address can be
distinguished. Can contain up to 16 characters.
Can contain up to 32 characters.
Configuring the LDAP Server Settings
Description
Description
343