Winding Bobbin Thread; When Performing Winding Bobbin Thread While Performing Sewing; When Performing Winding Bobbin Thread Only - JUKI AMS-210ENHL2210/TF10S Instruction Manual

4-15. Winding bobbin thread

(1) When performing winding bobbin thread while performing sewing

(2) When performing winding bobbin thread only

The bobbin winding will not start immediately after turning the power on. To activate
the bobbin winding function, set a pattern number or the like fi rst, then press the set
ready key
tion is enabled.
① Display the bobbin winding screen.
Press BOBBIN WINDER button
screen (blue) and the presser comes down. Then the bobbin
winding screen is displayed.
② Start bobbin winding.
When the START switch is pressed, the sewing machine ro-
tates to starts bobbin winding.
③ Stop the sewing machine.
Press STOP button
and returns to the normal mode. When the START switch is
pressed during bobbin winding, the sewing machine stops
while remaining in the bobbin winding mode. This means that
the sewing machine re-starts bobbin winding when the START
switch is pressed again. Use this way when winding bobbin
thread around plural bobbins.
to invoke the sewing screen. In this state, the bobbin winding func-
– 77 –
Thread the bobbin winder and wind
the bobbin thread onto the bobbin as
illustrated in the fi gure.
in the data input
and the sewing machine stops