Scsi Options; Menu Screen - HP StorageWorks MSL5000 series User Manual

Table 6: View Library Options (Continued)
Option
Barcode Label Assignment
Barcode Label Check Digit
Barcode Reader
Module Configuration
Library Auto Power-On Mode

SCSI Options

Selecting this option lets you view the settings defined from the SCSI option in
the Edit Options area (see
Note:
return to the previous SCSI Options screen, select the

Menu screen.

HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
Lets you specify the alignment of a bar code label. The options
are Left or Right. When used in conjunction with the Barcode
Label Size option, this option strips unwanted trailing characters
(left alignment) or leading characters (right alignment). The
default is Left Align.
Lets you specify whether to enable or disable the verification of a
check digit character in the bar code label. The default is
Disabled.
Lets you enable or disable the bar code reader retries option.
The default is Retries Enabled.
Lets you configure a library for Standalone, Master, or Slave
operation. The default is Standalone.
Lets you enable or disable an automatic library power-on after a
power loss without the need to touch the GUI screen. The default
is Enabled.
You can move to the next sequential SCSI Options screen by selecting the . To
Description
Figure 47).
or Back button to return to the
Operation
85