Network Options - HP StorageWorks MSL5000 series User Manual

Operation
Table 7: View SCSI Options (Continued)
Data Transfer Speed
Report Element Type
Fast Terminate
Sequence

Network Options

Selecting this option lets you view the settings defined from the Network option
in the Edit Options area (see
describes the available options.
Note:
administrator for specific information on connecting the library to your network.
Figure 48: Default view network options screen
Note:
selecting User Specified IP Address from the Network screen under Edit Options.
90
Option
Lets you set the robot or library SCSI data transfer rate to
Synchronous, 10 MB/sec, Synchronous, 5 MB/sec, or
Asynchronous Only. The default is Synchronous, 10
MB/sec.
The default is Disabled.
The default is Disabled.
There are no firmware default settings for networks. Contact your network
The IP Address, IP Mask, IP Gateway, and DNS Server become available after
HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
Description
Figure 48). Table 8 on page page 91 lists and