HP StorageWorks MSL5000 series User Manual page 130

Maintenance
4. Select Cleaning. If the default entry is not the tape drive to be cleaned, press
5. When the destination entry is correct, select Execute Clean.
6. When the cleaning cycle completes, the library returns the cleaning cartridge
130
Drive in the Destination Element Type box to sequence through the
available tape drive choices. You can also use the Decimal Keypad to enter
the tape drive number directly.
back to the cleaning cartridge slot (Cln'g Slot 0). To remove the cleaning
cartridge, select Magazine Access from the library Status screen.
HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide