Converting A Tabletop Model To A Rackmount Model; Converting A Tabletop Model (Four-Drive Model Shown) - HP StorageWorks MSL5000 series User Manual

Converting a Tabletop Model to a Rackmount Model

To make a tabletop library ready for rack enclosure installation:
1. Remove the rubber feet.
2. Remove the cover.
3. Attach the inner rails to the library using the supplied Allen wrench and
4. Proceed to
Figure 11: Converting a tabletop model (four-drive model shown)
HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
screws. Tighten the screws until snug.
"Setting Up the Tabletop Model."
Installation
41