Scsi Options - HP StorageWorks MSL5000 Series User Manual

SCSI Options

Selecting this option lets you view the settings defined from the SCSI option in the
Edit Options area (see Figure 4–22).
NOTE: You can move to the next sequential SCSI Options screen by selecting the ▼. To return
to the previous SCSI Options screen, select the ▲ or Back button to return to the Menu screen.
Figure 4–22: View SCSI options screen
Table 4–3 lists and describes the available selections.
Table 4–3: View SCSI Options
Option
Drive 0 Bus ID
Drive 1 Bus ID
Drive 2 Bus ID
(MSL5052/MSL5060
only)
MSL5000 Series Library User Guide
Description
Lets you set the SCSI addresses of drive 0. The
designators Drive 0 (outer tape drive) through Drive n
refer to the first through n th drives, counting from right to
left starting with the master unit in the scaled Library
system.
Lets you set the SCSI addresses of drive 1. The
designators Drive 1 (inner tape drive) through Drive n
refer to the second through n th drives, counting from
right to left starting with the master unit in the scaled
Library system.
Lets you set the SCSI addresses of drive 2. The
designators Drive 2 (lower, outer tape drive) through
Drive n refer to the third through n th drives, counting
from right to left starting with the master unit in the
scaled Library system.
Operation
4–23