Factory-Defined Accessory Pci Slots; Library Card Cages - HP StorageWorks MSL5000 series User Manual

Factory-Defined Accessory PCI Slots

MSL Series tape libraries contain one or two rear-access card cages, and one or
two 32-bit, 33-MHz Compact PCI backplanes (see
contain the plug-in connectors for a library controller board, and up to five
optional HP-defined PCI add-in cards.
Note:
area (upper card cage area for the four-drive models).
1
2
Figure 7: Library card cages
HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
Caution: Use of non-HP qualified PCI option cards can damage your MSL
Series library and will void product warranty. Follow all installation,
configuration, and operating instructions shipped with the option card
upgrade kit.
The library controller board must be installed in the right slot of the card cage
Library Controller Board
Optional Embedded Fibre Channel Board
Figure 7). These backplanes
Factory-Defined Accessory PCI Slots (up to
3
5)
Introduction
33