View Library Options - HP StorageWorks MSL5000 series User Manual

Figure 46: View library options screen
Table 6
Table 6: View Library Options
Option
Library Remains Offline After
Power-up Initialization
Auto Power-Up An Installed
Drive After Timeout
Unload Mode
Total Reserved Slots
HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
lists and describes the available Library options.
Library does not go online after power-up initialization. You
must select the Online option from the Menu screen on the GUI
touch screen. The default is Disabled.
Enables a tape drive to be automatically powered up (after a
delay), after replacing a tape drive if you do not explicitly power
up the tape drive from the GUI touch screen. The default is
Enabled.
Lets you determine whether a SCSI MOVE MEDIUM command
is interpreted as Implicit or Explicit. If Implicit, the library
unloads a tape drive before attempting to move a cartridge from
that tape drive. If Explicit, the host must issue a SCSI UNLOAD
command to a tape drive before each MOVE MEDIUM
command that removes a cartridge from that tape drive. The
default is Implicit.
Lets you reduce a specified number of slots at the rear of a
magazine. Some host software imposes size limits on library
magazines for licensing purposes, and does not operate with a
library that exceeds the licensed size. The default is 0.
Description
Operation
83