Specifying SCSI Addresses
1 2
NOTE
The tape library has a Fast/Wide SCSI interface. SCSI addresses can be set
from:
• 0 to 7 on a DLT4000-based library
• 0 to 15 on a DLT7000-based library
If connecting to a narrow host, use only addresses 0 to 7.
Table 4-1
SCSI ID Options
Option
SET IDs*
Assigns individual SCSI IDs to each
drive and the robotics controller.
VIEW IDs*
Displays the current drive and robotics
controller settings.
Table 4-2
Default SCSI Address Settings
DEVICE
LIB
DRV 1
DRV 2 (two-drive models only)
ADMIN*
PSWD 00 000 000
Purpose
Specifying SCSI Addresses
SCSI IDs
Explained in
"Setting SCSI Addresses" on
page 4-10
Viewing Current SCSI Addresses"
on page 4-10
SCSI ID
6
5
4
Library Operation
BUS #
Bus 1
Bus 1
Bus 2
4-9