HP StorageWorks MSL5000 series User Manual page 162

Troubleshooting
Table 11: Fault Symptom Codes (Continued)
FSC
7009 The opcode for a WORD message
was unknown
700A The opcode for a DWORD message
was unknown
700B The button causing library to
go offline was unknown
(A command to take the library off-line was
completed successfully, but the GUI button
that initiated the action could not be
identified.)
700C Destination Xchg was Null
700D Sending of a cmd failed
700E Deactivating a drive that is
not attached
(The control task indicates that a request to
deactivate a drive failed because the drive
is not attached.)
700F Deactivation of a drive failed
(The control task indicates that a request to
deactivate a drive failed. Reason
unknown.)
7010 Drive removal failed
(The drive task indicates that a request to
power-down a drive failed. Reason
unknown.)
162
Message
HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
ERP
Press the Enter button to reboot.
Cycle power to the library or reboot using
the GUI touch screen.
Press the Enter button to reboot.
Cycle power to the library or reboot using
the GUI touch screen.
Press the Enter button clear the message.
Cycle power to the library or reboot using
the GUI touch screen.
Press the Enter button to reboot.
Cycle power to the library or reboot using
the GUI touch screen.
Press the Enter button to reboot.
Cycle power to the library or reboot using
the GUI touch screen.
Press the Enter button clear the message.
Cycle power to the library or reboot using
the GUI touch screen.
Ensure the drive shows good status
through the drive status window.
Reseat the drive.
Press the Enter button clear the message.
Cycle power to the library or reboot using
the GUI touch screen.
Ensure the drive shows good status
through the drive status window
Reseat the drive.
Press the Enter button clear the message.
Cycle power to the library or reboot using
the GUI touch screen.
Ensure the drive shows good status
through the drive status window.