Move Media; Gui Contrast Controls; Move Media Screen (Two-Drive Model Shown) - HP StorageWorks MSL5000 series User Manual

Operation

Move Media

Select this option to display the Move Media screen (see
Media option lets you remove a cartridge from a tape drive, a data slot in any
magazine, or a mail slot in a left-hand magazine. This option also lets you load
and unload tape cartridges from the installed tape drives.
See the section on
page 131 for detailed removal information.
Figure 42: Move media screen (two-drive model shown)

GUI Contrast Controls

Select these options to increase or decrease the contrast of the GUI display (see
Figure
the library Status screen. Incremental steps can range from 0 to 31 depending on
your preference. These settings are volatile and are restored to default values upon
reboot or power cycling.
78
"Replacing a Cleaning Cartridge in a Reserved
Caution: To reduce the risk of drive damage, use DLT, SDLT, and Ultrium
cleaning cartridges only in their respective drive types.
Caution: Remove media from all drives and slots prior to library transport.
38). Incremental steps are set by adjusting the GUI contrast controls from
HP StorageWorks MSL5000 and MSL6000 Series Tape Libraries User Guide
Figure 42). The Move
Slot" on