Table of Contents
Advertisement
Chapter 5 Volume Management
5.2 Functions in the Action Area for Volume
The procedure to stop migration is as follows:
Procedure
1
2
3
5.2.9
Delete Snap Data Pool Volume
An SDPV is a logical volume that is created in the SDP.
This function deletes SDPVs to reduce SDP capacity.
The procedure to delete an SDPV is as follows:
Procedure
1
When migration is stopped, data in the migration source volume can be
accessed normally.
Select the volume for which migration is to be stopped (multiple selections can
be made) and click [Stop RAID Migration] in [Action].
→ A confirmation screen appears.
Click the [OK] button.
→ The stop migration process starts.
Click the [Done] button to return to the [Volume] screen.
If the target SDPV is currently being used, it will be deleted after the SDPV
is released.
Select the SDPV to be deleted (multiple selections can be made) and click
[Delete SDPV] in [Action].
→ A confirmation screen appears.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
90
End of procedure
P2X0-1090-02ENZ0
Advertisement
Table of Contents
