Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
3
•
Transfer Rate
Select the transfer speed.
-
Auto-negotiation
-
1.5 Gbit/s
-
3 Gbit/s
-
6 Gbit/s
•
Reset Scope
Specify the reset scope of the target port.
Reset scope is the range where the command reset request from the server is
performed, when the target port is connected to multiple servers.
-
I_T_L (I: Initiator, T: Target, L: LUN)
Reset (cancel) the command request from the server that sent the command reset
request.
-
T_L (T: Target, L: LUN)
Reset (cancels) the command request from all of the servers that are connected to
the port.
•
Release Reservation if Chip is Reset
Select whether to "Enable" or "Disable" the function to release the reserved status of
the volume when the target port (chip) is reset.
→ A confirmation screen appears.
Click the [OK] button.
→ Modification of the SAS port parameters starts.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
370
P2X0-1090-02ENZ0
Advertisement
Table of Contents
