Table of Contents
Advertisement
Chapter 7 Thin Provisioning Pool Management
7.1 Thin Provisioning Pool Status
-
•
Encryption
The TPP encryption status is displayed.
-
-
Filter setting
Name
Disk Type
RAID Type
7.1.2
Thin Provisioning Pool (Threshold)
This function shows the threshold for monitoring the used capacity of a Thin Provisioning Pool.
Warning
TPP usage exceeds the "Warning" threshold.
CM
The TPP is encrypted by CM.
Disable
The TPP is not encrypted.
Filter
Registering the license for the Thin Provisioning feature is required to use
Thin Provisioning function. To check the registration status of the license,
refer to
"7.1.4 Thin Provisioning Pool (License)" (page
•
If the usage status of the TPP changes (for example, the used capacity
exceeds the threshold or returns to normal), notification is sent to the
destination for REMCS (REMote Customer Support system) center,
SNMP Trap, E-Mail or syslog that was specified using the procedure in
"11.2.7.1 Setup Event Notification" (page
•
To change the threshold of a TPP, follow the procedure that is provided
in
"7.2.7 Modify Threshold Thin Provisioning Pool" (page
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
Input the TPP name that is to be displayed.
TPPs matching or partially matching the input name are displayed.
When not using the TPP name for filtering, leave this item blank.
Select the drive type that is to be displayed.
When not using the drive type for filtering, select "All" (all TPPs).
Select the RAID type that is to be displayed.
When not using the RAID type for filtering, select "All" (all TPPs).
137
Description
141).
550).
164).
P2X0-1090-02ENZ0
Advertisement
Table of Contents
