Table of Contents
Advertisement
Chapter 7 Thin Provisioning Pool Management
7.1 Thin Provisioning Pool Status
•
Attention
The attention threshold (%) for monitoring the TPP used capacity is displayed. When the
"Attention" threshold is omitted, "0%" is displayed.
Filter setting
Name
Disk Type
RAID Type
7.1.3
Thin Provisioning Pool (ECO Mode Schedule)
This function displays the ECO mode setting status of the Thin Provisioning Pool.
Filter
Input the TPP name that is to be displayed.
TPPs matching or partially matching the input name are displayed.
When not using the TPP name for filtering, leave this item blank.
Select the drive type that is to be displayed.
When not using the drive type for filtering, select "All" (all TPPs).
Select the RAID type that is to be displayed.
When not using the RAID type for filtering, select "All" (all TPPs).
Registering the license for the Thin Provisioning feature is required to use
the Thin Provisioning function. To check the registration status of the
license, refer to
"7.1.4 Thin Provisioning Pool (License)" (page
•
To use the ECO mode, follow the procedure in
Mode General Setting" (page 540)
Schedule" (page 541)
create an ECO mode schedule.
•
To assign the ECO mode to a TPP, refer to
Schedule" (page
139
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
Description
and
"11.2.6.2 Create ECO Mode
to perform the common ECO mode setup and
166).
141).
"11.2.6.1 Modify ECO
"7.2.8 Assign ECO Mode
P2X0-1090-02ENZ0
Advertisement
Table of Contents
