Fujitsu Eternus web GUI User Manual page 308

Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
The procedure to create a SAS host group is as follows:
Procedure
1
2
Click [Add SAS Host] in [Action].
Enter a host group name to be created, and select a host response to be
assigned to the host group.
• Host Group Name
Specify the host group name.
An existing host group name cannot be specified. Refer to
adding SAS hosts" (page 620)
The following input conditions apply:
- 1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
- Space
• Host Response
Select a host response to be assigned to a host group.
The host response list created in the ETERNUS DX Disk storage system is displayed.
- Windows EMPD (*1)
- Linux EMPD (*1)
- Solaris EMPD (*1)
- Solaris MPxIO
- HP-UX
- AIX EMPD (*1)
- AIX VxVM
- AIX Single Path
- VS850/SVC
- Host responses created in the ETERNUS DX Disk storage system
- Others
*1: EMPD: ETERNUS Multipath Driver
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
for details.
308
"Naming conventions for
P2X0-1090-02ENZ0