Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
2
3
Specify the LUN group name, and click the [Add] button.
•
Name
Specify the LUN group name.
An existing LUN group name cannot be specified.
The following input conditions apply:
-
1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
-
Space
Specify the LUNs and the number of LUNs, to allocate volumes to, select the
volume numbers to be allocated to the corresponding LUNs, and click the [OK]
button.
•
Start Host LUNs
Specify the LUN from which allocation is to be started. The smallest LUN among the
available LUNs is used as the default value.
The following input condition applies:
-
"0" - "1023" (Decimal number)
•
Number of LUNs
The number of LUNs, to which the volumes are allocated, is displayed.
The following input condition applies:
-
"0" - "1024" (Decimal number)
•
Select Volume
Use the radio button to select which volume number the allocation is to be started from.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
376
P2X0-1090-02ENZ0
Advertisement
Table of Contents
