Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
11.2.7.5
Start/Stop Performance Monitoring
This function acquires performance information and displays the result.
The Start/Stop Performance Monitoring function is used to start or stop acquiring the ETERNUS
DX Disk storage system performance information. Acquired information can be checked using
the [Performance] function.
The procedure to start or stop performance monitoring is as follows:
■
Starting performance monitoring
The [Start] button is displayed when the "Monitoring State" is "Stopped".
Procedure
1
2
•
When the ETERNUS DX Disk storage system is rebooted, the
performance monitoring process is stopped.
•
If performance monitoring is started from other monitoring software, GUI
cannot stop the process.
•
If performance monitoring is started from GUI, the process can be
stopped from other monitoring software.
If performance monitoring is started from CLI, GUI can stop the process. If
performance monitoring is started from GUI, CLI can stop the process.
Click [Start/Stop Perfmon] in [Action].
Specify the interval, and click the [Start] button.
•
Interval (sec.)
Input the interval to acquire the performance information between 30 and 300 (sec.) in
units of 30 seconds.
→ A confirmation screen appears.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
568
P2X0-1090-02ENZ0
Advertisement
Table of Contents
