Table of Contents
Advertisement
This guide provides a variety of basic information about Web GUI for the ETERNUS DX80 S2/
DX90 S2 and the ETERNUS DX410 S2/DX440 S2 (hereinafter also referred to as "ETERNUS
DX Disk storage system" or "the device"). It should be referred to when setting up and
maintaining the ETERNUS DX Disk storage systems. This guide is specially written for the
ETERNUS DX Disk storage system Web GUI system administrators and operators.
Knowledge of UNIX or Windows® system management is required.
Structure of This Manual
This manual consists of the following 11 chapters and five appendixes.
●
Chapter 1 Outline
This chapter describes the outlines, features, operation environment, user management
function, and operation screens for Web GUI.
●
Chapter 2 Startup and Shutdown
This chapter describes how to start, exit, log in and log out from Web GUI.
●
Chapter 3 Initial Setup
This chapter describes the initial settings for the ETERNUS DX Disk storage systems.
●
Chapter 4 Configuration Settings
This chapter describes the configuration settings for using Standard volumes and Thin Provi-
sioning functions.
●
Chapter 5 Volume Management
This chapter describes volume status and management.
●
Chapter 6 RAID Group Management
This chapter describes RAID group status and management.
●
Chapter 7 Thin Provisioning Pool Management
This chapter describes Thin Provisioning Pool status and management.
●
Chapter 8 Advanced Copy Management
This chapter describes Advanced Copy status and management.
3
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
Preface
Second Edition
June 2011
P2X0-1090-02ENZ0
Advertisement
Table of Contents
