Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.1 Connectivity Status
•
CA Port Group Member
The location information of the port, which is a port group member, is displayed.
If there are two port group members, the ports are displayed, being separated with a ",
(comma)". If there are three or more ports, the location information of the two ports and the
[more...] link are displayed.
-
•
Status
Whether the port group is used ("Active") or not ("Inactive") for the host affinity settings is
displayed.
"Host affinity setting" is to specify association between "host group", "port group" and "LUN
group".
-
-
9.1.3.1
FC Port
Parameters of the FC ports that are registered in the ETERNUS DX Disk storage system are dis-
played.
The following items are displayed in the Main area:
•
Port
The location information of the target port is displayed.
-
•
Type
The CA type (fixed at "FC") of the target port is displayed.
•
Status
The status of the target port is displayed.
CM#x CA#y Port#z (x: CM number, y: CA number, z: Port number)
Active
The port group is used for the host affinity settings. The LUN group can be accessed from
the host group via the port group
Inactive
The port group is used for the host affinity settings. The port group is not being used.
CM#x CA#y Port#z (x: CM number, y: CA number, z: Port number)
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
271
P2X0-1090-02ENZ0
Advertisement
Table of Contents
