Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
4
An error screen appears in the following conditions:
•
When the "Host Group Name" does not satisfy the input
conditions
•
When the "Host Group Name" has not been specified
•
When the "IP Address" does not satisfy the input conditions
•
When the "IP Address" is not Class A, B, or C
•
When the "Alias Name" does not satisfy the input conditions
•
When the "Alias Name" overlaps the existing Alias name
•
When the "CHAP User ID" does not satisfy the input conditions
•
When the "CHAP Password" does not satisfy the input conditions
•
When the "Confirm CHAP Password" does not satisfy the input
conditions
•
When the "CHAP Password" and the "Confirm CHAP Password"
do not match
•
When only one of the "CHAP User ID" or the "CHAP Password"
has been specified
Click the [OK] button.
→ Registration of the iSCSI host group starts.
An error screen appears in the following conditions:
•
When the "Host Group Name" matches with an existing host
group name (Host group names cannot overlap with any other
host group names, irrespective of the interface types.)
•
When the total number of host groups has exceeded the
maximum number for the device
•
When the total number of hosts has exceeded the maximum
number for the device
•
When no hosts are registered in a host group, or when nine or
more hosts are registered in a host group
•
When the specified host has already been registered in another
host group
•
When several iSCSI hosts with the same "IP Address" and "iSCSI
Name" have been configured
•
When several iSCSI hosts are specified with the same "iSCSI
Name" and no IP addresses are specified
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
306
P2X0-1090-02ENZ0
Advertisement
Table of Contents
