Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
2
3
Click the [Add] button.
Click the [Trap No.] link to edit the existing trap.
Add or edit the trap information, and click the [OK] button.
•
Manager No.
Select a manager number from "Manager01" to "Manaegr10".
The management number of the SNMP Agent Manager, which has been registered
using the procedure in
as an option.
•
SNMP Version
Select the trap SNMP version from "v1", "v2c", or "c3".
•
Community Name
Select the community name used when sending a trap.
The community name, which has been registered using the procedure in
Setup SNMP Agent Community" (page
If "v1" or "v2c" is selected as the "SNMP Version", the "Community Name" must be
specified.
•
User Name
Select the user name used when sending a trap.
The user name, which has been registered using the procedure in
SNMP Agent User" (page
If "v3" has been selected as the "SNMP Version", the "User Name" must be specified.
•
Port No.
Enter the port number of the trap destination between 1 - 65535.
When changing a port number, enter a unique port number.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
"11.2.3.4 Setup SNMP Agent Manager" (page
474), is displayed as an option.
471), is displayed as an option.
478
466), is displayed
"11.2.3.7
"11.2.3.6 Setup
P2X0-1090-02ENZ0
Advertisement
Table of Contents
