Chapter 2 Startup and Shutdown
2.2 Login
2.2
Login
Log in to GUI to start the operation. The GUI operation screen appears.
The menu that is displayed depends on the role that is applied for the user account.
The procedure for logging in is as follows:
Procedure
1
2
If a login is attempted while 16 users are already logged in to the GUI, an
error screen appears. When this occurs, note the error message and try
logging in again after completing the required operation.
Click the [Option] button in the login screen, and select the language (English or
Japanese).
Enter the User ID and Password, and click the [Login] button.
The User ID and the Password vary depending on which account is being used to log in.
•
User ID
root
•
Password
root (Default)
•
Refer to
•
If the input error occurs, enter the User ID and Password again to
log on to the ETERNUS DX Disk storage system.
→ The operation screen appears.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
"11.2.5 User Settings" (page 523)
27
for user accounts.
P2X0-1090-02ENZ0