Eco Mode Schedule Detail - Fujitsu Eternus web GUI User Manual

For eternus dx90 s2; eternus dx80 s2; eternus dx410 s2; eternus dx440 s2
Table of Contents

Advertisement

Chapter 11 System Management
11.1 System Status
Box ID
The Box ID is displayed.
Box ID is the information to be used for application software to define the remote device. The
initial Box ID is a device ID that is created by combining device information (series name,
model, serial number, etc.).
Encryption Mode
The current encryption mode ("Enable" or "Disable") is displayed.
SED Authentication Key
Whether the SED authentication key has been "Registered" or "Not Registered" is displayed.
11.1.9

ECO Mode Schedule Detail

In this screen, the detailed information of an ECO mode schedule is displayed.
The following items are displayed in the Main area:
Schedule
No.
The schedule number is displayed.
Schedule Name
The schedule name is displayed.
Event List
Event
The detailed event information is displayed.
From Time
The time at which the event application is started is displayed.
-
To Time
The time at which the event application is stopped is displayed.
-
hh:mm (hh: Hour, mm: Minute)
hh:mm (hh: Hour, mm: Minute)
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
452
P2X0-1090-02ENZ0

Advertisement

Table of Contents
loading

Table of Contents