Fujitsu Eternus web GUI User Manual page 359

Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
• TCP Port No.
Enter the TCP port number of the target port between 0 and 28671.
Click the [Default] button to set the default TCP port number.
• TCP Window Scale
Select the TCP Window scale of the target port between 0 and 14.
"TCP Window Scale" is a parameter that is used to specify the TCP window size.
Specify the "TCP Window Scale" in powers of two.
The relationship between the setting value and the TCP Window Scale is as follows:
TCP Window Scale
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
• iSNS Server
Select whether to use the iSNS server in the target port.
When "Enable" is selected, enter the IP address of the iSNS server.
Internet Storage Name Service (iSNS) is almost equivalent to Domain Name System
(DNS) for the Internet. iSNS server is used to convert the iSCSI name to the IP address
on the iSCSI network.
The following input conditions apply:
- 1 - 3 numeric characters
- All text boxes: "0" - "255"
• iSNS Server Port No.
When "Enable" is selected to use the iSNS server for the target port, specify between 0
and 65535 for the port number of the iSNS server.
Click the [Default] button to set the default iSNS server port number.
●
iSCSI Settings
• iSCSI Name
Enter the iSCSI name of the target port.
Click the [Default] button to set the default iSCSI name.
The following input conditions apply:
- Alphabetic characters (lower case) and numeric characters
- Symbols "-"(hyphen), "." (period) and ":"(colon)
- The name starts with "jpn." or "eui."
- Up to 223 characters
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
TCP Window size
32 KB
64 KB
128 KB
256 KB
512 KB
1024 KB
2048 KB
4096 KB
8192 KB
16384 KB
32768 KB
65536 KB
131072 KB
262144 KB
524288 KB
359
P2X0-1090-02ENZ0