Fujitsu Eternus web GUI User Manual page 584

For eternus dx90 s2; eternus dx80 s2; eternus dx410 s2; eternus dx440 s2
Table of Contents

Advertisement

Chapter 11 System Management
11.2 Functions in the Action Area for System
Reject INQUIRY from Unauthorized Host
Select whether to reject the "Inquiry" command from an unauthorized host. Select
"Enable" to reject.
When the "Inquiry" command is rejected, ETERNUS DX Disk storage system returns
an Affinity Error (5/25/81) for the "Inquiry" command from the unauthorized host. When
the command is not rejected, the ETERNUS DX Disk storage system responds nor-
mally.
W h e n u s i n g t h e V E R I TA S Vo l u m e M a n a g e r D y n a m i c
Multipathing (VxVM DMP), select "Enable".
When VxVM DMP is not used, the setting of this parameter does
not affect the state of the ETERNUS DX Disk storage system.
→ A confirmation screen appears.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
Load balance for all hosts is disabled when "Disable" is
selected for "Load Balance". If the ETERNUS DX Disk storage
system is in overload in this status, the warning sense
response is suppressed.
When connecting the ETERNUS DX Disk storage system and
HP-UX hosts, disable the Load Balance setting. If "Enable" is
selected for "Load Balance", incorrect logs may be recorded in
the host.
Load balancing by Multipath Driver is operated regardless of
whether the "Load Balance" of this function is enabled/
disabled.
584
P2X0-1090-02ENZ0

Advertisement

Table of Contents
loading

Table of Contents