Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
The procedure to create an iSCSI host group is as follows:
Procedure
1
2
•
Registration of the host is necessary to create a host group. Create a
new host group when registering a host on GUI.
•
One host cannot be a member of several host groups.
•
Assign an appropriate host response to the created host group. The
host response configures the operation mode which is appropriate to
the host.
If an appropriate host response is not configured to the host group, the
path may not be switched correctly or the volume may not be
recognized correctly.
•
To change the settings of the host groups, refer to
Group" (page
•
To add a port to an existing host group, refer to
Group" (page
•
To change the host group names, refer to
Host" (page
Click [Add iSCSI Host] in [Action].
Enter a host group name to be created, and select a host response to be
assigned to the host group.
•
iSCSI Host Group Name
Specify the host group name.
An existing host group name cannot be specified. Refer to
adding iSCSI hosts" (page 619)
The following input conditions apply:
-
1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
-
Space
•
Host Response
Select a host response to be assigned to a host group.
The host response list created in the ETERNUS DX Disk storage system is displayed.
-
Windows EMPD (*1)
-
Linux EMPD (*1)
-
Solaris EMPD (*1)
-
Solaris MPxIO
-
HP-UX
-
AIX EMPD (*1)
-
AIX VxVM
-
AIX Single Path
-
VS850/SVC
-
Host responses created in the ETERNUS DX Disk storage system
-
Others
*1:
EMPD: ETERNUS Multipath Driver
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
312).
312).
335).
for details.
301
"9.2.2.5 Modify Host
"9.2.2.5 Modify Host
"9.2.2.13 Rename iSCSI
"Naming conventions for
P2X0-1090-02ENZ0
Advertisement
Table of Contents
