Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
2
Specify the parameters, and click the [Set] button.
●
Notification E-Mail
•
Notification E-Mail
Select whether to "Enable" or "Disable" the E-Mail notification function.
•
Destination E-Mail Address
Specify the E-Mail destination address.
At least one address must be specified. Up to five addresses can be specified.
The following input condition applies:
-
Up to 63 alphanumeric characters and symbols (except spaces)
•
Comment
Input the message (comment) to be added to the E-Mail. The comment can be omitted.
The following input conditions apply:
-
Up to 225 characters
-
Within ten lines
-
Alphanumeric characters, symbols, and spaces
●
Mail Server Settings
•
LAN Port used for SMTP Connection
Select the LAN port connecting to the SMTP server from "MNT" or "RMT".
•
Sender E-Mail Address
Input the E-Mail address of the ETERNUS DX Disk storage system.
The following input conditions apply:
-
Up to 63 characters
-
Alphanumeric characters and symbols (except spaces)
•
SMTP Server
Specify the IP address or domain name of the SMTP server to be used.
The following input conditions apply:
-
Up to 63 characters
-
Alphanumeric characters and symbols
•
SNMP Port No.
Specify the port number used by the SMTP server between 1 - 65535.
•
SMTP requires authentication
Select the user authorization method to connect to the SMTP server from "None" or
"AUTH SMTP".
•
User Name
If "AUTH SMTP" is selected for "SMTP Authentication Information", specify the sender
user name.
The following input conditions apply:
-
Up to 32 characters
-
Alphanumeric characters and symbols
•
Password
When "AUTH SMTP" is selected for "SMTP Authentication Information", specify the
sender password.
The following input conditions apply:
-
Up to 64 characters
-
Alphanumeric characters and symbols
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
485
P2X0-1090-02ENZ0
Advertisement
Table of Contents
