Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
The procedure to create SSH server key is as follows:
Procedure
1
2
•
The SSH server key must be created to access from CLI via the SSH
connection.
•
After the SSH server key has been created, the information must be
updated in the device before accessing from CLI via the SSH
connection. Log out from CLI and wait a few minutes before logging in
again.
•
When the SSH server key is renewed, the setting PC that is accessed
from CLI via the SSH connection is forcibly disconnected.
•
The SSH server key is specified in the factory settings (key length: 2048
bits).
•
Even if the SSH server key has been renewed, the setting PC, which
has logged into CLI via the Telnet connection, will not be affected.
Click [Create SSH Server Key] in [Action].
Select the SSH server key length, and click the [Create] button.
•
Key Length
Select the SSH server key length from "1024 bit", "2048 bit", and "4096 bit".
The SSH server key length is equivalent to the encryption level. In general, the longer
the key is, the higher the encryption level becomes (difficult to decrypt the encrypted
data).
→ A confirmation screen appears.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
489
P2X0-1090-02ENZ0
Advertisement
Table of Contents
