Table of Contents
Advertisement
Appendix B Status List
B.2 Volume Status
B.2
Volume Status
Volume status is displayed with an icon and the status name. The volume status is described
below.
Available
Available (Initializing)
Spare in Use
Readying
Rebuild
Copyback
Redundant Copy
Partially Exposed Rebuild
Exposed Rebuild
Exposed
Partially Exposed
Not Ready
Broken
Status
The volume is operating normally.
The SDV is being initialized.
The RAID group to which the volume belongs manages redundancy
by using the hot spare disk.
The volume is not formatted.
Rebuilding from a failed data disk to the hot spare disk is being
performed in the RAID group to which the volume belongs.
Copyback is being performed in the RAID group to which the volume
belongs.
Redundant copy is being performed in the RAID group to which the
volume belongs.
Rebuilding from the first failed data disk to the hot spare disk is being
performed in the RAID group to which the volume belongs.
This status is displayed only when the RAID type of the RAID group
to which the volume belongs is "High Reliability (RAID6)".
Two of the data disks for the RAID group to which the volume
belongs have failed. Rebuilding from the first failed data disk to the
hot spare disk is being performed. In addition, all the hot spare disks
have already been used. As a result, the second failed data disk is
waiting for the hot spare disk to become available.
This status is displayed only when the RAID type of the RAID group
to which the volume belongs is "High Reliability (RAID6)".
The RAID group to which the volume belongs lost redundancy due
to disk failure.
One of the disks that configures the RAID group to which the volume
belongs has failed.
This status is displayed only when the RAID type of the RAID group
to which the volume belongs is "High Reliability (RAID6)".
The RAID group to which the volume belongs is blocked.
The volume is broken.
613
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
Description
P2X0-1090-02ENZ0
Advertisement
Table of Contents
