Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
-
CHAP Password
The password for the member host, on which the CHAP Authentication will be used,
is displayed with "*".
To use the CHAP Authentication on the iSCSI host to be added, enter the password.
It is not necessary to configure this item if CHAP Authentication is not used.
The password can be entered only when the iSCSI host has been selected, and the
"Change CHAP Password" checkbox has been selected.
Configure a user ID and a password as a pair.
The following input condition applies:
•
12 - 100 alphanumeric characters and symbols
-
Confirm CHAP Password
The confirmation password for the member host, on which the CHAP Authentication
will be used, is displayed with "*".
To use the CHAP Authentication on the iSCSI host to be added, re-enter the
password for confirmation. It is not necessary to configure this item if CHAP
Authentication is not used.
The confirmation password can be entered only when the iSCSI host has been
selected, and the "Change CHAP Password" checkbox has been selected.
The following input condition applies:
•
12 - 100 alphanumeric characters and symbols
→ A confirmation screen appears.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
321
P2X0-1090-02ENZ0
Advertisement
Table of Contents
